Home ProductsLithium Iron Phosphate Battery

Lithium Battery Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack

Good quality Deep Cycle Lithium Battery for sales
Good quality Deep Cycle Lithium Battery for sales
We have cooperated with Topband for several years, we think Topband is a reliable supplier with quality products, and professional technical support!

—— Stephan Moberg

In energy storage system project, Topband team provides expertise support and excellent product at reasonable price. Much appreciated for their effort

—— Christin Gartner

I'm Online Chat Now

Lithium Battery Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack

China Lithium Battery  Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack supplier
Lithium Battery  Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack supplier Lithium Battery  Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack supplier

Large Image :  Lithium Battery Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack

Product Details:

Place of Origin: China
Brand Name: Topband
Certification: MSDS
Model Number: TB3660F-T110A

Payment & Shipping Terms:

Minimum Order Quantity: 100
Price: Negotiable
Packaging Details: standard export carton
Delivery Time: 2~4weeks for samples; 4~6weeks for mass production
Payment Terms: L/C, T/T
Supply Ability: 450Mwh/year
Contact Now
Detailed Product Description
Nominal Voltage: 36V Typical Capacity: 60Ah
Material: LiFePO4 Dimension: 380(±2)*240(±2)*270(±2)mm
Weight: 25.2±1.0kg Standard Charge Current: 15A
Maximum Charge Current: 15A Peak Discharge Current: 65A (5S)
Cycle Life (DOD100%): 2000 Cycles Warranty: 2 Years

Lithium Battery Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack

Battery Pack Brief Introduction

This specification applies to the TB3660F-T110A battery manufactured by Shenzhen Topband Battery Co., Ltd, Describes the type and size, performance, technical characteristics, warning and caution of the rechargeable cell. Please be sure the voltage is equal or output voltage difference less than 0.2V before parallel connection, professionals only. It is strictly prohibited any series between battery packs. Any requirements on serials connection,please contact TOPBAND for details.

 

11 Battery Type

LiFePO4 (LFP)

12 Reference Standard

 

13 Product SPEC

36V/60Ah 12S3P

14 Cell Brand and Model

TB027070145C-Fe-20Ah

15 Period of Warranty

Period of Warranty reference to the contract

16 Battery Specification Amendment

If the raw materials, production processing, production system or battery usage environments & other conditions need to be change, the amendment side needs provide the written advice to the other side, only the both sides come to an end, the amendment will be effective.

 

2. Battery Pack Basic Features

NO. Items Characteristics Testing Methods
1 Nominal Voltage 38.4V Follow GB/T18287-2013>
2 Nominal Capacity 60Ah Follow
3 Minimum Capacity 57Ah Follow
4 Battery internal Impedance Internal Impedance≤60mΩ Internal Impedance Testing Machine(1kHz )
5 Shipment Voltage 38.440.8V Multi-meter
6 Dimension Length 380(±2)*240(±2)*270(±2)mm Vernier caliper
Width
Height
gross weight 25.2±1.0kg electronic scale
7 Working Temperature Charge 0~45℃,45~85%RH Temperature & Humidity Instruments
Discharge -20~55℃,45~85%RH
8 Storage Temperature & Humidity Range Short: above one month -20~+55℃,45~85%RH Temperature & Humidity Instruments
Medium: above three months 0~+45℃,45~85%RH
Long:above one year +5~+30℃,45~85%RH
9 Allowed maximum continuous charge current 15A Multi-meter
10 Allowed maximum continuous discharge current 15A 65A for 5S
11 Allowed maximum reverse charge voltage NO Allowed /
12 Allowed maximum charge voltage 43.8±0.2V Multi-meter
13 Discharge cut-off voltage 24~32V Multi-meter
 

 

3. Battery Pack Electrical Characteristics

3.1 Testing Conditions (Unless Specially Requirements)

Temperature:20±5℃ Related Humidity: 45~75%

Atmosphere Pressure: 86~106kPa

The testing items under the Shipment Voltage(38.440.8V)

3.2 Battery Pack Electrical Characteristics

No. Items Standards Testing Methods
1 Internal Impedance Impedance ≤80mR Under 20±5℃ Environment Temperature , the Usage Frequency of Fully Charge( 1KHz) , Use AC Internal Impedance test machine to test
2 Nominal Capacity 60Ah Rest for 0.5~1 hour after fully charge, Using electrical loader to connect with the battery output port, and discharge with constant current 0.2C till it can’t discharge. Do the cycle three times, if there is one time that the discharge time is equal or more than 285minute , you can stop.
3 Short circuit protection No load ability after short-circuit .comeback capability of loading after remove the lead away; Short the pack with the lead (<50mΩ). If remove the lead away, connect the electronic loader with P+, P- of protection board again, so load ability comes back.
4 Allowed Maximum continuous charge Current 15A charging with this current for more than 0.5h and the added temperature of battery pack less than 20℃.
5 Allowed Maximum continuous discharge Current 15A Discharging with this current for more than 0.5h and the added temperature of battery pack less than 20℃.
6 Over Current Protection 65~95A Using electron load connect with output side, discharge with 65A for about 5sec Discharge with 95A for less than 40 millisecond,
7 the delay time of over current protection 10~40ms Using electron load connect with output side, discharge with more than 95A and record the voltage wave of output side with oscillograph . Numerating the time of voltage from wave to zero for voltage
8 cycle life Discharge Capacity ≥80% Discharge it with the current of 0.2C to the cut-off voltage, and store it for 15min.Charge a battery with the current of 0.2C, then keep the voltage and current constant and continue to charge it until completed . After storing the battery for 15min. The test is to be conducted as per the above cycles. The cycle should be 1000 times. At the 1001 times discharge capacity should not be less than ≥80% with 0.2C.
9 Discharge Temperature Characteristics The ratio between discharge capacity and charge capacity should be not less than the following value At 20±5℃ discharge the battery with the current of 0.2C to the cut-off voltage and record charge capacity. Store the battery at the following temperature for 2h and discharge the battery with 0.2C to the cut-off voltage.
Discharge Current Discharge Temperature
-20℃ 0℃ 25℃ 55℃
0.2C 60% 80% 100% 95%
10 Charge Retention remain capacity≥90% At 20±5℃ completely charge and store it for 28days,and then discharge it with 0.2C to the cut-off voltage. (We suggest charge the battery to 38.4~40.8V every three months)
11 Over Discharge Protection furbish Charging With 0.2C Charge the battery with 0.2C for 5min and measure the output voltage (24V)of the battery pack. The battery should have load .

 

 

4. Battery Pack Reliability Test

4.1 Testing condition (Unless Special Requirements)

Temperature:20±5℃ Relative Humidity: 45~75%

Atmosphere Pressure: 86~106kPa

All testing under full capacity

4.2 Reliability Test

No. Items Standards Testing Methods
1 Vibration Testing The appearance of battery should not leakage, break or explosion Fix a charged battery on a vibrating table, vibrate it for 90 minutes in three mutually perpendicular directions at the 0.8mm resonance. The frequency is to be varied at the rate of 1hz/min between 10 and 55 hertz.
2 High Temperature Discharge Testing The battery should be no remarkable breakage, distortion. Discharge time should not less than 255mins Place a full charged battery under the environments of 55℃ for 2 hours. Discharge it at the current of 0.2C to the cut-off voltage. Then keep it at 20℃±5℃ for 2 hours.
3 Low Temperature Discharge Testing The battery should be no remarkable breakage, distortion. Discharge time should not less than 180 minute Place a full charged battery under the environments of -20℃ for 15-24 hours. Discharge it at the current of 0.2C to the cut-off voltage. Then keep it at 20℃±5℃ for 2 hours.
4 Constant Humidity & Temperature Testing The battery should be no remarkable breakage, distortion. Discharge time should not less than180mins Place a full charged battery under the environments of 40℃ and 90% - 95%RH for 48 hours. And keep it in the room temperature for 2 hours. Then discharge it at the current of 0.2C to the cut-off voltage.
5 High & Low Temperature Storage The battery should be no remarkable breakage, distortion. And charge/discharge normally Place a full charged battery in a oven with 55±2℃ for2 hours, then keep it under 20±5℃ for 4hrs, then place it in a oven with -20±2℃ for 2 hours, then keep for 4 hours under 20±5℃, cycle as high temperature-normal temperature-low temperature-normal temperature-high temperature for 10 times
 

5. BATTERY PACK SAFETY TEST

5.1 Testing condition (Unless Special Requirements)

Temperature:20±5℃ Relative Humidity: 45~75%

Atmosphere Pressure: 86~106kPa

All testing under full capacity

5.2 Battery Pack Safety Test

No. Items Standards Testing Methods
1 Short-Circuit The battery should be no remarkable breakage, distortion. And charge normally. Use a resistor with less than 50mΩ to make the battery short circuit for 1 hour. The appearance and characteristics are normal.
2 Over Discharge Protection Test The battery should be no remarkable breakage, distortion. Appearance and charge are normal. Discharge the battery at the rate of 0.2C with the load of 30Ω for 24h . Charging for 10sec with specified adapter , and check the voltage(24V)
3 Impact Test The battery should be no explosion or catch fire Place a full charged battery on a flat and put a stainless steel stick (Diamond 7.9mm) in the middle of the battery upright . Beat the steel stick with 9.1Kg
 

6. Pack diagram

Lithium Battery  Lithium Iron Phosphate Battery 36V60Ah LiFePO4 Battery Pack

Contact Details
Shenzhen Topband Battery Co., Ltd

Contact Person: Jerry Yang

Send your inquiry directly to us (0 / 3000)