Payment & Shipping Terms:
|Items:||Lithium Battery Solar Storage 12V 50Ah||Type:||Lifeo4 Battery|
|Normal Capacity:||50Ah||Communication Function:||Bluetooth|
|Application:||RV Caravans/Camping Cars, Marine And Boats||Nominal Voltage Range:||12V|
|Housing:||Black Plastic Hoursing(standard Color)||Keywords:||12V 50Ah Lifepo4 Battery, Lithium Ion Battery, 12V 150ah Lifepo4 Battery|
|Protection:||Built-in BMS||Bluetooth APP:||Ios Or Android Version|
|Max Charge Current:||50A||Maximum Discharge Current:||50A Withstand 30mins|
|Recommended Charge Current:||<25A||Series Connection:||Not Allowed|
Rv Lithium Battery,
Lithium Phosphate Battery
1. General Information
This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL1250F- S110A manufactured by SHENZHEN TOPBAND BATTERY CO.,LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack.
The battery pack support Bluetooth communication function.
Through Android and IOS APP, can read the battery status and information. Especially due to the Android system’s openness, different smart phone manufacturer will have their own different Bluetooth hardware version and customized feature Android systems. So the APP may not work well on some smart phones(with Android system) due to compatible issue. It is necessary for the customer to confirm whether the phone is compatible for the APP.
|4||Series application||Not allowed|
|6||Operation temperature range @charging||0~45℃|
|7||Normal charge voltage||14.6±0.1V|
|8||Recommended float charge voltage(for Standby use)||13.8±0.1V|
|9||Allowed MAX charge current||50A@Battery initial Temp 25±5℃|
|10||Recommended charge current||≤25A|
|11||Operation temperature range @discharging||-20~60℃|
|12||Output Voltage Range||10.0~14.6V|
|13||Allowed discharge current||50A withstand 30min @Battery initial Temp 25±5℃|
|14||Pulse discharge current||150A withstand 3s|
|15||Discharge Cut-off voltage||10.0V|
|18||Storage Temperature & Humidity Range||Short: within one month||-20~35℃, 45~75%RH|
|Long term: above one month||-10~30℃, 45~75%RH|
|19||Self-discharge rate||Residual capacity||≤3% per month; ≤15% per year|
|Reversible capacity||≤1.5%per month; ≤8% per year|
3.Electrical Characteristics & Test Condition
Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%
Test the internal resistance of 50% SOC battery pack with 1 kHz AC internal resistance test instrument.
Rest for 1 hour after fully charged, then discharge with 0.33C current until the battery reaches the discharge cutoff voltage.
Repeat above process for three times, if the discharge time is not less than 180 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity.
Cycle life (DOD%100)
Discharge with the current of 0.5C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h.
Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.
At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage.
Record the ratio between discharging & charging capacity.
|5||Charge Retention ability||remain capacity≥90%||
Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage.
4. Circuit Protection
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
|Over charge||Over-charge protection for each cell||3.80±0.03V|
|Over-charge release for each cell||3.60±0.05V|
|Over-charge release method||Under the release voltage|
|Over discharge||Over-discharge protection for each cell||2.50±0.05V|
|Over-discharge release for each cell||3.00±0.05V|
|Over-discharge release method||Over the release voltage|
|Over current||Discharge over current protection||150~200A|
|Protection delay time||50~200ms|
|Over current release method||Release after 30s.|
|Battery CHG/DSG over temperature||Protection @65±5℃|
|Battery CHG lower temperature||Protection @-10±5℃|
5. Dimensional Drawing
Contact Person: Wendy Liang