Payment & Shipping Terms:
|Battery Material:||Nano LiFePO4||Nominal Voltage:||25.6V (LFP-4S)|
|Charge Current:||≤60A||Discharge Current:||≤100A|
|Peak Discharge Current:||400A/3s||Cut-off Discharge Voltage:||18.4~22.4V|
|Cycle Life:||2000cycles @100%DOD||Warranty:||2 Years|
24V 100AH Deep Cycle Lithium Battery, UPS Rechargeable lifepo4 Battery, Bluetooth Communication
1. General Information
This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL24100F-S110A manufactured by Shenzhen Topband Battery Co., Ltd, describes the type, performance, technical characteristics, warning and caution of the battery pack.
≤30mΩ @1kHz AC
|4||Battery operation temperature range @charging||0~45℃|
|5||Normal charge voltage||29.2±0.2V|
|6||Recommended float charge voltage(for Standby use)||27.6±0.2V|
|7||Allowed MAX charge current||80A@Battery initial Temp 25±5℃|
|8||Recommended charge current||≤50A|
|9||Battery operation temperature range @discharging||-20~60℃|
|10||Output voltage range||20.0~29.2V|
|11||Allowed discharge current||
|12||Pulse discharge current||400A withstand 3s|
|13||Discharge cut-off voltage||
|16||Storage Temperature & Humidity Range||Short: within one month||-20~+ 60℃, 5~75%RH|
|Long term: above one month||-10~+45℃, 5~75%RH|
|17||Self-discharge rate||Residual capacity||≤3% per month; ≤15% per year|
|Reversible capacity||≤1.5%per month; ≤8% per year|
3. Electrical Characteristics & Test Condition.
@Ambient Temperature 25±5℃ & Humidity 45%~75%.
@50% SOC @1kHz AC internal resistance test instrument
After Normal charge, discharge @0.33C current to the end of discharge voltage.
|3||Short circuit protection||
Auto cutoff load when short circuit
Connect the positive and negative of this battery pack through a lead with 0.1Ω resistance.
|4||MAX charge Current||100A||Charging with this current for more than 0.5h and the added temperature of battery pack less than 20℃.|
|5||MAX discharge Current||100A||Discharging with this current for more than 0.5h and the added temperature of battery pack less than 35℃.|
Cycle life (DOD%100)
|≥2000cycle||Discharge with the current of 0.5C until it can’t discharge, and then rest it for 1h. Charge the battery following CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.|
|-20℃||70%||At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage.|
|8||Charge Retention ability||remain capacity≥96%||
After normal charge, store the battery @25±5℃ for 28days, then discharge capacity @0.33C,the retention capacity accord with criterion.
4. Circuit Protection
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
|Over charge||Over-charge protection for each cell||3.75±0.03V|
|Over-charge release for each cell||3.60±0.03V|
|Over-charge release method||Under the release voltage|
|Over discharge||Over-discharge protection for each cell||2.50±0.05V|
|Over-discharge release for each cell||2.80±0.05V|
|Over-discharge release method||
Discharge over current protection
115A±10A,delay time 20±5s
|Battery Over temperature||Protection @65±3℃, Release @50±3℃|
|Charge lower temperature||Protection @0±3℃, Release @4±3℃|
Contact Person: Jerry Yang