Payment & Shipping Terms:
|Recommended Continue Current:||100A (25℃ For Cycle Life)||Max. Discharge:||200A For 30 Minutes|
|Application:||RV, Marine, Solar Storage, Backup Power||Color:||Black & Blue|
12V 200Ah Lithium Iron Phosphate Battery With RS485 communication , Camper Trailer Battery
Topband private mould battery with communication & reset function:
1. General Information
This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL12200F-SC
-S110A manufactured by SHENZHEN TOPBAND BATTERY CO., LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack. The battery pack support pre-charge function,when connect to the capacitive load, built-in pre-charge circuit smooth the start current and no spark. The battery pack support Bluetooth communication function. Through Android and IOS APP, it can read the battery status and information. Especially due to the Android system’s openness, different smart phone manufacturer will have their own different Bluetooth hardware version and customized feature Android systems. So the APP may not work well on some smart phones (with Android system) due to compatible issue. It is necessary for the customer to confirm whether the phone is compatible for the APP.
2. Specification(@Battery initial Temp25±5℃)
|2.7||Floating charge voltage||13.8±0.2V|
|2.8||Standard charge current||100A|
|2.9||Maximum charge current||150A|
|2.10||Standard discharge current||150A|
|2.11||Maximum discharge current||200A/withstand 30 min||@Battery initial Temp 25±5℃|
|2.12||Pulse discharge current||500A/Continuous for 3s|
|2.13||Discharge cut-off voltage||10.0~11.5V|
|2.14||Series parallel application||Max. 4 groups in series optional|
|2.15||Pre-charge to capacitive load||Available||Smooth the start current and no spark when connect to load|
|Recommended operating temperature:15℃～35℃|
|2.19||Self-discharge rate||Residual capacity:≤2%/month;≤12%/year|
|2.20||Storage Temperature & Humidity Range||Less than 1 month:-20℃～45℃,45%RH～75％RH|
|Less than 3 months:-10℃～35℃,45%RH～75％RH|
Recommended storage environment:
Long time storage:
If the battery need be stored for a long time, the voltage should be 13.2V (50%SOC), and stored in the condition as storage proposal. It need at least one charge & discharge cycle every six months.
3. Test Conditions
3.1 Standard Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.2 Unless otherwise specified, the tested product is required unused within two month after outgoing.
3.2 Standard Charge Mode
"Standard Charge" means at 25±2℃ charge to limit voltage with 0.5C constant current, then charge with constant voltage until current less than 0.02C.
3.3 Quick Charge Mode
"Quick Charge" means at 25±2℃ charge to limit voltage with 0.67C constant current, then charge with constant voltage until current less than 0.02C.
3.4 Standard Discharge Mode
"Standard Discharge" means at 25±2℃ discharge to the cut-off voltage with 0.67C current.
3.5 Quick Discharge Mode
"Quick Discharge" means discharge with 1C current withstand 30 mins.
4. Product Performance
|4.1||Rated Capacity||200Ah||Rest for 1 hour after fully charged, then discharge with 0.5C current until the battery reaches the discharge cutoff voltage. Repeat above process for three times, if the discharge time is not less than 120 minutes, you can stop and define the Discharging current*time value (Ah) as battery capacity.|
|4.3||Internal resistance||≤20mΩ||50% battery SOC state frequency of 1 KHZ ac resistance tester|
|≥2000cycle||Discharge with the current of 0.33C until it can’t discharge, and then rest it for 1h. Charge the battery following CC (0.33C)/CV (14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.|
|-20℃||≥70%||At 25±5℃ discharge the battery with the current of 0.5C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.5C to the cut-off voltage.|
|4.7||Charge Retention ability||
|Charge the battery to full capacity and store it for 28days, and then discharge it with 0.5C to the cut-off voltage.|
|4.8||Bluetooth communication||Through APP, user can read the battery system information such as voltage, current, SOC, temperature, etc.|
5. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS) that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
|5.1||Over charge||Over-charge protection for each cell||3.80±0.05V|
|Over-charge release for each cell||3.60±0.05V|
|Over-charge release method||Under the release voltage|
|5.2||Over discharge||Over-discharge protection for each cell||2.50±0.05V|
|Over-discharge release for each cell||2.80±0.05V|
|Over-discharge release method||Charging recovery|
|5.3||Over current||Discharge over current protection 1||255±5A, delay 4~6min|
|Discharge over current protection 2||400±20A, delay 5~6s|
|Over current release method||30s after cutoff the load.|
|5.4||Short||Do not short-circuit the electrodes||Designed For 850A /500us|
|5.5||Battery temperature||Charge over temperature||Protection @65±5℃|
|Charge low temperature||Protection @0±2℃|
|Discharge over temperature||Protection @65±5℃|
Contact Person: Yvonne